This VEVOR 4 Ton Low Profile review looks at a steel floor jack designed to reach beneath low vehicles and lift across a broad range.
Its 4-ton capacity, dual-pump design, and long handle may appeal to home mechanics who want a manual garage jack with substantial rated capacity.
VEVOR K560 Jack Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsVEVOR K560 4 Ton Low Profile Floor Jack
A steel, hand-pumped floor jack for garage DIYers and enthusiasts who need low entry height, a broad lifting range, and a long handle.
- 4-ton (8,800-pound) stated load capacity.
- Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
- Dual parallel pump system designed to reach maximum height in seven full strokes.
- Heavy-strength steel construction with steel wheels; the two rear wheels swivel for maneuvering.
Pros
- Low 3.94-inch minimum height can suit vehicles where a taller jack may not fit beneath the lifting point.
- The 4-ton capacity and 20.98-inch maximum height cover a broad range of lifting needs.
Consider before buying
- At 93 pounds, it is a heavy tool to lift into a vehicle or move over steps and uneven ground.
- Its 33.5-by-17.1-inch footprint requires dedicated storage space.
Read the full review summary
The K560 combines a 3.94-inch minimum height with a 20.98-inch maximum and a 4-ton capacity.
The dual parallel pump is designed to reach the top height in seven full strokes, while steel wheels and a 52-inch handle support positioning and manual operation.
Its design suits DIY maintenance and enthusiast garage work where a low-profile approach and broad lifting range matter.
Consider the jack's 93-pound weight and dimensions when planning storage and movement, and confirm that your vehicle's lift points and required working height suit the range.
The buying factors
VEVOR K560 Jack Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rated capacity
The 4-ton rating provides substantial stated capacity for a floor jack, subject to matching the vehicle and lift point to the tool's limits.
Low-entry access
A 3.94-inch minimum height may help with lower-clearance vehicles; check the actual approach clearance at your intended lift point.
Lifting range
The range extends to 20.98 inches, offering flexibility across vehicle heights when the required lift point is compatible.
Pump efficiency
A dual parallel pump system is designed to reach maximum height in seven full strokes, reducing repeated pumping compared with a slower design.
Positioning and handling
Steel wheels, including two universal rear wheels, aid rolling and steering, though the jack's 93-pound weight makes it a substantial tool to handle.
Storage practicality
The two-piece handle can be separated for storage, but the jack itself measures 33.5 by 17.1 by 9.3 inches and needs garage space.
Key Features and Specifications of VEVOR K560 Jack
- 4-ton (8,800-pound) stated load capacity.
- Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
- Dual parallel pump system designed to reach maximum height in seven full strokes.
- Heavy-strength steel construction with steel wheels; the two rear wheels swivel for maneuvering.
- A 360-degree rotatable, detachable rubber saddle and a foam handle bumper.
- A 52-inch (1,320 mm) two-piece handle separates for storage.
- The design includes a built-in load system intended to prevent use beyond capacity and cites CE, UKCA, and ASME PALD-2014 standards.
Pros and Cons of VEVOR K560 Jack
Pros
- Low 3.94-inch minimum height can suit vehicles where a taller jack may not fit beneath the lifting point.
- The 4-ton capacity and 20.98-inch maximum height cover a broad range of lifting needs.
- Dual parallel pumps are designed for a seven-stroke lift to maximum height.
- The long handle, rolling wheels, rotatable saddle, and detachable two-piece handle add practical positioning and storage features.
Consider before buying
- At 93 pounds, it is a heavy tool to lift into a vehicle or move over steps and uneven ground.
- Its 33.5-by-17.1-inch footprint requires dedicated storage space.
- The maximum height is 20.98 inches; buyers needing more clearance should compare that figure with the work they plan to do.
Who Should Buy VEVOR K560 Jack?
Good fit
Consider the VEVOR K560 if you maintain cars, trucks, or SUVs in a garage and need a low-entry manual jack with a substantial rated capacity.
Its 3.94-inch minimum height and 20.98-inch maximum give it a useful stated range, while the dual-pump design aims to reduce the number of strokes needed to reach the top.
It is also a plausible fit for enthusiasts who value a long handle and a saddle that rotates and detaches.
Before choosing it, check the clearance and lift point on your vehicle, the height required for your work, and whether your storage space can accommodate a heavy, full-size floor jack.
Who should skip it
Look elsewhere if you need a lightweight jack to carry in a vehicle or routinely move across stairs; the K560 weighs 93 pounds.
Choose a different lift if your vehicle or repair requires a minimum clearance below 3.94 inches or a maximum height above 20.98 inches. Verify your vehicle's lift-point requirements and use appropriate support equipment for maintenance.
How the VEVOR K560 Jack fits garage work
Low profile and usable range
The 3.94-inch minimum height is the key fit detail for a low-profile floor jack.
Measure the clearance beneath the intended lifting point, not just the vehicle's general ground clearance; the approach angle and nearby bodywork can affect whether the jack can be positioned.
At the other end, its 20.98-inch maximum is the limit to compare against your planned work.
Capacity and lifting setup
The 4-ton rating indicates the jack's stated maximum load capacity, but capacity alone does not determine whether a particular lift is appropriate.
Consider the vehicle, the point being lifted, and the jack's placement, and follow the vehicle and jack instructions.
The built-in load system is described as preventing use beyond capacity; it does not replace careful setup or suitable stands for work beneath a vehicle.
Pump, handle, and positioning
A dual parallel pump system is designed to lift to full height in seven strokes, and the 52-inch handle provides leverage for operation. Steel wheels, with two universal rear wheels, are intended to help steering and rolling.
These features support garage maneuvering, though the jack's 93-pound weight remains relevant when moving it between storage and a work area.
Storage and contact points
The two-piece handle separates for more compact storage, while the jack body still occupies a substantial footprint. A rubber saddle that rotates through 360 degrees and can be detached offers flexibility for positioning at the lift point.
Check that the saddle and vehicle contact area align as intended before lifting.
Alternatives to VEVOR K560 Jack
Battery-focused alternative

4,000+ ratings
Read Amazon ReviewsVEVOR 5 Ton Electric Car Jack Kit
Choose the K560 if low entry height and a higher maximum lift matter more than powered operation.
Consider the electric kit for tire changes where its powered lift and included wrench, light, and inflator better match the job, provided its higher minimum and lower maximum heights fit your vehicle.
- This electric hydraulic kit has a 5-ton capacity and a stated lifting range of 6.1 to 16.5 inches.
- It includes an electric impact wrench, LED light, tire inflator, and power options using a car battery or cigarette-lighter port.
- The K560 is a manual steel floor jack with a 3.94-to-20.98-inch lifting range, a 52-inch handle, and a 4-ton capacity.
Floor Jacks alternative

700+ ratings
Read Amazon ReviewsVEVOR 6 Ton Air Jack
The K560 is the more suitable option when the lower minimum height and manual floor-jack format fit the vehicle and workspace.
Consider the air jack when greater capacity or maximum lift is more useful and an air compressor is available; its higher minimum height may limit access under lower vehicles.
- This air jack is rated for 6 tons and reaches up to 26.5 inches with the extension column; without it, the minimum height is 6.7 inches.
- It requires an air compressor and has a three-angle adjustable handle and rubber pads.
- The K560 is a manual floor jack rated for 4 tons, with a 3.94-inch minimum height and 20.98-inch maximum.
Is VEVOR K560 Jack Worth It?
The VEVOR K560 is worth considering for garage DIYers who need a low-profile manual jack with a 4-ton rating, a broad lifting range, and a dual-pump design.
Its long handle, swiveling rear wheels, and rotatable rubber saddle add practical touches for positioning and operation.
Its main compromises are weight and storage footprint, along with a maximum height that may not suit every repair.
Confirm the vehicle's clearance, lift-point fit, and required working height before buying; if those match and a 93-pound floor jack is manageable, the K560 presents a capable feature set for home garage use.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsVEVOR K560 4 Ton Low Profile Floor Jack
A steel, hand-pumped floor jack for garage DIYers and enthusiasts who need low entry height, a broad lifting range, and a long handle.
- 4-ton (8,800-pound) stated load capacity.
- Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
- Dual parallel pump system designed to reach maximum height in seven full strokes.
- Heavy-strength steel construction with steel wheels; the two rear wheels swivel for maneuvering.